Image 1

Chlorine Dioxide 1000G (CLO2)

×
×
Brand:
Price:
$75.99
SKU:
RB-1000
Quantity:
  • Product Description

    1000 gram part A & B CLO2

    *VAPOR Deodorize up to 2,000 S.F.

    *or Vapor Mold Remove up to 500 S.F.

    *Males 55 liquid gallons of 500 ppm H level

    *Clean up to 60,000 gallons of Process Water

    *or Clean (1) 2,500 gallon tank & line system

     NOTE:  Always wear appropriate NIOSH respirator, googles & gloves when using this product as advised on SDS. 

    downloadsds-blue.jpg

    If you’ve had trouble eliminating odors in a building, our Chlorine Dioxide (CLO2) deodorizer kits from may be the solution you’re looking for. Chlorine Dioxide (CLO2) is a powerful oxidizing agent which is widely used in water treatment and other industrial operations. While chlorine dioxide is most commonly used as a liquid solution, these kits are uniquely designed to release a Chlorine Dioxide (CLO2) vapor when mixed together in water. The Chlorine Dioxide (CLO2) vapor can quickly fill the interior of a building, destroying odor sources in just 10-14 hours.

    In fact, Chlorine Dioxide (CLO2) can be safely used to eliminate odor in nearly any enclosed space.

    To learn how Chlorine Dioxide (CLO2) could help with Mold give us a call.

    We recommend to get the best results, use the aerator bubbler.  The aerator will speed up the process and cause it to be much more concentrated which will give you much better results.

    Vapor Activation Instructions for 1000 Gram Kit with aerator.

    Add 2 Gallons of Tap water to a clean 5 gallon bucket.  Pour Part B into bucket/water. Stir and mix well. Add an aerator to side of bucket and insert plastic hose with weights on end into bucket of water/Part B and turn aerator on.

    Then, slowly pour the Reset Part A into the water/Part B mix to Generate CLO2 vapor.  Evacuate the treatment area immediately after adding Part A and activating the product.

    Vapor Activation Instructions for 1000 Gram Kit with no aerator.

    Mix Reset Part B in 1 gallon of tap water in a 5 gallon bucket for 30 seconds.  Then mix Reset Part A in 1 gallon of tap water in another container for 30 seconds.  Then pour part A into 5 gallon bucket with the part B.  This will activate the product.  Evacuate the treatment area immediately after adding Part B and activating the product.  Note: This process may take up to 24 hours for this to finish without the aerator.

    Warning. Wear appropriate NIOSH respirator, googles & gloves when using this product as advised on SDS. 

  • Product Reviews

    ×

    This product hasn't received any reviews yet. Be the first to review this product!

    Write A Review

  • Find Similar Products by Category

×
×